Produces Type I Water from Tap Water
Great for Facilities Using Bottled Water
Puts an ultrapure water source within easy reach!
Produces water that exceeds ASTM Type I standards with resistivities up to 18.2 mgh-cm and 5ppb Total Organic Carbon content.
Microprocessor controlled purity monitor provides a digital reading of the water purity exiting the system.
Monitoring system alerts you to vital information including membrane performance and when it is time to change the pretreatment cartridge.
6.5L internal reservoir incorporates an air filet to prevent air-borne impurities from contaminating the water during storage.
High flow reverse osmosis membrane ensures water will be available when you need it.
A dual wavelength quartz ultraviolet lamp 185 and 254 nm oxidizes organics down to virtually undetectable levels while controlling bacteria within the system.
Whisper quiet pump provides you optimal flow rate and silent operation.
Integral low water pump protection included ensuring pump protection in the event there is not sufficient feedwater in the tank.
0.2 hollow fiber absolute final filter at the point of use provides water free of particles and bacteria.
includes all of the accessories you will need to set up your system the first time including a set of cartridges, membrane and 0.2 final filter.
Pre-Filtration Accessory Kit is recommended for use when feed water has moderate to high turbidity and fouling index. Extends the life of the pre-filter incorporated in the EASYpure RoDi.
Combination high surface area 5 pre-filter and membrane descaling media.
Wall Mounting Bracket is ideal when counter space is limited.
Booster pump is required when feed water pressure is less than 30 p.s.i.
Sturdy swivel base provides easy access to rear cartridge door.
35-lb. Shipping weight.
Dimensions : 12 inchW x 18 inchH x 19 inchD
Max feed pressure : 80 p.s.i.
Min Feed Pressure 30 p.s.i.
Electrical : 10 to 240 VAC